• New
    Quick hook replacement actuator repair kit for tractor cat. 1 CBM
    Quick hook replacement actuator repair kit for tractor cat. 1 CBM
    Quick hook replacement actuator repair kit for tractor cat. 1 CBM

    Quick hook replacement actuator repair kit for tractor cat. 1 CBM

    €45.00
    €50.00
    Save 10%
    Tax Included
    Return policy:14
    original CBM, quick hooks category 1, weight 0.55 kg
    Quantity :
    account_circleShare
    Quick hook replacement actuator repair kit for tractor cat. 1 CBM

    Quick hook replacement actuator repair kit for tractor cat. 1 CBM

    original CBM, quick hooks category 1, weight 0.55 kg

     

    Quick hook replacement actuator repair kit for tractor cat. 3 - 3S CBM Quick hook replacement actuator kit for tractor cat. 1 original CBM brand. Very useful spare part to always keep the quick hook for the tractor's lower arms in working order. To ensure that they do not rust or become damaged, the hooks must always be kept free from mud and washed with plain water. Below are the instructions for disassembling and reassembling the quick hook. Maintenance of category 1 quick couplers for tractors: All hooks do not require any particular interventions. It is sufficient to clean them from mud and earth by washing them with water. The frequency of washing depends on the type of work and the terrain. After the intervention, make sure that the mechanism is free to slide perfectly. To replace the internal components of the hook, it is strongly recommended to remove the lower arm from the tractor. To disassemble the mechanism you will need: Clean the inside of the quick hook to remove soil and dirt residues Unhook the spring (9) from the pin (3) and extract the elastic pin (2) (Fig.1) Align the pin (4) with the hole (5) and extract it (Fig.2) Remove the control lever (6) from the upper opening and remove the shutter assembly, plate and spring (7-8-9) from the ball seat side (Fig.3) Remove the spring pins (1A-B, 10 and 11) if worn Upon reassembly: Refit the pins (1A-B, 10 and 11) taking care to orient 1A-B as in Fig.3 (groove downwards) Insert the shutter - plate and spring assembly (7-8-9), taking care to connect the plate to the shutter by means of the slot, on the kneecap seat side (Fig.3) Align the hole (12) of the plate (8) with the hole (5) of the hook body, insert the lever (6) through the upper opening, overlap it with the plate and connect them with the pin (4) (Fig.2) Align the shutter assembly, plate and spring with the hook body and connect them with the pin (2), taking care to align the pin with the upper and lower holes of the hook. Finally hook the spring (9) to the pin (3) (Fig.1) Application: The replacement actuator kit is applicable to category 3 and 3S lower arm quick hooks._x000D_Brand CBM Applications category 1 hooks
    Newgardenstore

    Data sheet

    Specific References

    Quick hook replacement actuator repair kit for tractor cat. 1 CBM | Newgardenstore.eu

    Quick hook replacement actuator repair kit for tractor cat. 1 CBM

    €45.00
    €50.00
    Save 10%
    Tax Included
    Return policy:14